CALCULATORS

Concrete Calculator

Estimate concrete volume for slabs, rectangular footings, and round columns. Add a waste allowance, convert metric or imperial dimensions, and estimate bag quantities using the yield printed on your product.

VOLUME ESTIMATE

Describe your pour

Browser-only

Use the same unit for every dimension.

Editable allowance added to the geometric volume.

Estimate bag quantity (optional)

Use the yield printed on your product label.

Estimated concrete volume

Including waste allowance m³
Cubic feet ft³
Cubic yards yd³
Calculated before waste
m³
Waste allowance
m³ (%)
Estimated bags at entered product yield

Enter a bag yield above if you want a product-specific bag estimate.

Volume is calculated from the selected shape and dimensions, multiplied by the element count, then increased by your waste percentage. Product yields and site conditions vary—confirm the order quantity with your supplier or contractor.

Dimensions are calculated locally in your browser and are not uploaded or saved.

How to estimate concrete volume

Choose the pour shape, enter all dimensions in one unit, set the number of matching elements, and select a waste allowance. Results are shown in cubic metres, cubic feet, and cubic yards.

Volume formulas

Slabs and rectangular footings use length × width × thickness or depth. Round columns use π × (diameter ÷ 2)² × height. Repeated elements are multiplied by their count; the waste allowance is added after the geometric volume is calculated.

Use consistent units and product yield

All dimensions must use the selected unit. The optional bag estimate uses the volume-per-bag yield on your product label and rounds up. Bag weight alone does not determine yield because mixes and products differ.

Check site and supplier requirements

This is a geometric estimate, not a purchase guarantee. Uneven ground, formwork, reinforcement, delivery minimums, and supplier rounding can change the amount required. Confirm final quantities and structural specifications with a qualified professional.

Frequently asked questions

What shapes can this concrete calculator estimate?

It calculates rectangular slabs and footings from length, width, and thickness or depth, plus round columns from diameter and height. Enter the number of identical elements to multiply the volume.

How much extra concrete should I allow for waste?

The waste allowance is an editable percentage added to the calculated volume. The right amount depends on formwork, ground conditions, site access, and the supplier; confirm your project quantity locally.

How is the bag quantity calculated?

Enter the volume yield per bag shown on your product information. The calculator divides the volume including waste by that yield and rounds up to a whole bag. Bag weights and yields vary by product, so no generic bag size is assumed.

Can I mix feet and inches in the same calculation?

All dimensions in one calculation use the selected unit. Convert them to the same unit first—for example, enter a 6-inch slab thickness as 0.5 feet if feet are selected.

Is the result an exact order quantity?

No. It is a geometric estimate. It does not account for uneven excavation, reinforcement displacement, formwork, delivery minimums, or supplier rounding. Have the final quantity checked for your site.

For planning only. Verify site quantities, material specifications, and structural requirements with a qualified professional.