GAMES & INPUT

Gamepad Tester

Check whether a controller is connected, watch its buttons and analog axes respond in real time, and try rumble if your browser and gamepad support it.

CONTROLLER CHECK

Connect a gamepad

Browser-only

Controller status

Connected

Axes

Raw range: −1 to 1

This controller does not report analog axes.

Buttons

Browser-reported indexes

This controller does not report buttons.

No controller input is uploaded or stored. The Gamepad API only exposes controller state to this page while you test.

Check controller buttons and analog sticks

Start monitoring, wake the controller with a button press, then watch the browser-reported input change. This helps spot unresponsive buttons, drifting axes, and connection problems.

Understand mappings and values

The tester reports the controller mapping supplied by your browser, numbered buttons, button pressure from 0 to 1, and raw axes that are usually between −1 and 1. It does not assume every controller uses the same physical button layout or calibration.

Browser and device support varies

Gamepad visibility may require HTTPS or localhost, a user gesture, and browser permission or operating-system support. Rumble is optional and only works when both the browser and controller expose a compatible haptic actuator.

Private local testing

Controller state is read from the browser Gamepad API and shown on this page. Input is not sent to a server, stored, or shared with a leaderboard.

Frequently asked questions

How do I get my controller to appear?

Click Start controller test, then press any button on the controller to wake it. Some browsers only reveal a gamepad after user interaction. You may need to reconnect or allow the browser page to detect it.

Why are the button numbers different from my controller labels?

The Gamepad API reports button indexes and may identify a standard mapping, but layouts vary by platform and browser. This tester shows the browser-reported indexes and values rather than guessing physical button names.

What do the axis values mean?

Axes are raw browser values usually between -1 and 1. A stick near its center is around 0; moving it toward an edge changes the value. Calibration and dead zones vary by controller.

Can I test controller vibration?

Use Test rumble when a controller is connected. Haptic support depends on the browser, operating system, and gamepad; unsupported devices will show a message instead.

Does the tester upload controller information?

No. Gamepad state is read locally by your browser while the test is running. Controller identifiers and input are not uploaded or stored by this tool.

Controller compatibility depends on browser, operating system, connection, and device firmware.